Accsoon CineEye 2 II HDMI 5G Wireless Video Transmission 500FT OLED Monitoring

Description

ACCSOON CineEye 2 overview
CineEye 2 further optimized the transmission process, From the transmitter to the mobile device CineEye 2 has less than 0.06s of latency. It also supports 44KHz 16bit synced audio transmission, you can now stream the video with sound. The transmitter can send to up to 4 devices at the same time, and there’s no limit to the combinations of receivers, no matter if its four dedicated receivers, iphones, ipads and android devices or even freely mix and match, you can get synced video stream on all of them.
Accsoon Go app supports both Android and iOS platforms. The latency on iOS devices can still reach less than 0.06s. Now you can get sharp image quality similar to online video platforms’ high quality 1080p playback.
With High Image Quality, Robust Connection, Smooth Playback, Now you can turn you mobile devices into true wireless productivity.
All aviation grade CNC Aluminum Enclosure, high performance Low power draw chip, 1.3 inch OLED status screen, and fan-less design ensuring zero noise. NP-F and DC Input can be hot swapped for long shoots.
Turn your phone into a wireless recorder, which can record high-definition video in your phone for you to share in time.
KEY FEATURES
1. Low Latency, True Wireless Productivity on Set
Latency is a big thing for wireless video transmitters. From the transmitter to the receiver, CineEye 2 has less than 0.06s of latency, which is the best performance in its range. No matter if it’s monitoring or follow focus, CineEye 2 can handle it.
2. Monitoring on the “Big Screen”, Experience like never before
With Accsoon GO App, the latency on iPad is still less than 0.06s, equal to other professional monitors.
Now with more professional monitoring tools in our app, your iPad can turn into a pro-level on-set monitor, but with a 12.9 inch big screen and a lightweight enclosure that’s easy to carry around, giving you a refreshing taste of what smart monitoring should feel like.
3. 400ft or 150m of Transmission Range
4. One Transmitter for Multiple Receivers
CineEye 2 can send to up to 4 devices. iPhones, iPads, android devices, mix and match. Do it however you want.
5. This Time, with Sound,High Quality Synced Audio and Video Transmission
CineEye 2 supports video input of up to 1080p 60fps. it can give you much sharper image, fulfilling the needs of professional monitoring.
Also supports 44.1KHz/48KHz 16bit/24bit audio input, and it streams the audio with low compression codec, giving you near lossless audio monitoring experience.
6.Professional Monitoring App
The best Monitoring App in its class. Supports both Android and iOS. Comes with all the popular monitoring features like: Audio & Video Recording, False Color, Focus Assist, Histogram, Waveform, Loading 3D LUTs and CDLs, Custom Anamorphic Ratio, Custom Ratio Guides etc.
7.Supports HDMI Loop Out
The transmitter supports HDMI loop out. You use connect it to other devices like monitors, recorders and livestream equipment. Giving you maximum freedom.
8.Automatic Channel Selection
CineEye 2 supports 20 channels. During its boot time, CineEye 2 will automatically select the cleanest channel to stream, it will further improve CineEye’s anti-interference capability, ensuring ultra-stable wireless connection.
9.Low Power consumption, No-Fan Design
CineEye 2 has very low power draw, a single NP-F970 battery can last you 20 hours.
CineEye 2 also has no fans inside, ensuring zero fan noise, adding no trouble to your sound recording workflow.
10. 1.3 inch OLED Screen
CineEye 2 is equipped with a high-bright OLED screen. Paired with a clean and simple UI, you can easily learn about the real-time connection status and battery voltage. And with simple control logic, you can quickly adjust settings on the transmitter and receivers such as Video Quality Modes and Channel Selection.
11. Easy Firmware Updates
CineEye 2 support firmware updates. No sophisticated process needed, you can directly update your transmitter and receiver on the app.
12. Camera Control
When using our app for monitoring, you can send Rec./Stop commands to your camera. Supports mainstream cameras like Sony A7/A9 series, Canon EOS-R/5D-MK4, Panasonic GH5/CH5S/S1H, Nikon Z6/Z7, Fuji X-T3 and more.
(camera control needs correct control cable for your specific camera, sold separately. Later we’ll release control cable for various cinema cameras.)
13. Live Long and Hot Swap
You can power CineEye 2 with NP-F550/750/970 batteries and DC input (7.4V-16.8V), and a single NP-F970 can last you 20 hours. These two power inputs will be automatically hot-swapped, never putting a stop to your work on set.
14. RECODE the HQ video in your phone
APP FEATURE
1. Greyscale
2. R/G/B Single Channel
3. Histogram
4. Waveform
5. Focus Asist
6. LUT/CDL Loading 3D LUTs and CDLs
7. Zebra
8. False Color
9. Anamorphic
10. Audio Meter
11. Safe Guides
12. Grid Guides
13. Stream Recording
14. Changing Wi-Fi Name and Password
In-Package Items List
1.
Transmitter*1
2.
User-Manual
3.
Cold-Shoe Adapters*1
PRODUCT SPECIFICATION
Transmitter
Video Input
HDMI
Video Output
HDMI
Video Format
1080p 23.98/24/25/29.97/30/50/59.94/60fps
1080i 50/59.94/60fps
720p 50/59.94/60fps
480p 59.94/60fps
Audio
44.1KHz/48KHz 16bit/24bit PCM(Via HDMI)
Camera Control
Yes,
Latency
<60ms(IOS syestem)
OLED
1.3 inch OLED
Firmware Update
Yes, via App
Antenna
2 antenna
Channel
Auto/Manual, 20 channels (depend on local RF laws)
Transmission Power
17~20dBm
Range
150 meters(open sight, 1 transmitter to 1 phone)
Power Supply
NP-F550,NP-F750,NP-F970
DC(7.4~16.8V) Input;
Power Consumption
3.5 Watt (Typical)
Mounting Hole
1/4‘’ with Arri Locating Hole
Operating Temp
0~45 deg-C
Dimensions
105mm×67mm×30mm
Weight
185gram